The North American Guitar | Unit 9, Waterside | 44-48 Wharf Road | London | N1 7UX
Call us on 0207 835 5597 or Via Email
  Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3
  • Image 4

Watch it in action!

CopperSound Pedals "Daedalus" #1
Our new dual reverb, Daedalus. This video shows a brief overview of the pedal, demonstrating the rich reverb that can be attained when dialed in with numerous combinations. Recorded using a Morgan SW50R with a Shure Sm57 clean into Logic Pro. www.coppersoundpedals.com
  • CopperSound Pe...
    Our new dual reverb, Daedalus. This video shows a brief overv...

CopperSound Daedalus Reverb Guitar Effects Pedal

£219.00 £185.00 (inc VAT) £182.50 £154.17 (exc VAT)
(You save £34.00)

Quantity:

Shipping:

Calculated at checkout

Product Description

Sounds from the shores of Crete.

Much like the engineer that its name derives from, Daedalus was methodically designed and crafted. As opposed to using a chip, CopperSound built the reverb off the newest Belton 3 brick.

In its infancy, it was a simple one knob reverb. Over several months, Daedalus grew its wings. The addition of the Depth knob was the first step. An expression jack allows the user to insert any expression pedal to control the decay of the reverb using a TRS Y cable (not included). The Blend knob was then added to give the user control over the amount of external effect being placed into the decay.

The Pre Amp is the 'special sauce' here. It has the ability to add volume to whatever pedal is in the expression loop. Enough volume that the external pedal is almost as loud as the initial reverberated note. This can be very useful for swells and experimental players. The Pre Amp knob also adds volume to the decay and the length of the decay.

The Reverb II knob allows for two separate reverb levels of independent footswitches. Set one for shorter, traditional reverb sounds and the second for longer, drawn out reverb sounds. Both Reverb knobs work with the rest of the controls.

REVERB – Controls the overall amount of reverb. Similar to a wet/dry mix knob, only the initial note is always heard.

DEPTH – Controls the length of the reverb decay.

BLEND – Determines how much of the external pedal, that’s inserted into the FX is heard.

REVERB II – Controls the overall amount of reverb when the right footswitch is engaged.

PRE AMP – Increases the size of the reverb even further. Also, gives extra volume to any effect that’s placed in the FX loop.

EXPRESSION (FX LOOP) – Plug in a TRS splitter cable to place any effect into the decay of the reverb. With a volume pedal in the loop, the treadle now controls the reverb knob. The reverb knob setting now becomes the treadle toe down position. TIP = Send, RING = Return

9V Power– Standard 5.5mm x 2.1mm centre negative power supply - Daedalus has internal polarity protection (power supply not included)